The relations between the theoretical plate number (TPN) and flow rate and also between retention time and flow rate were investigated using ODP2 HP 4D (4.6 mm I.D. x 150 mm length). Each sample showed the highest TPN at the flow rate of 0.4mL/min, while efficiency decreased at 0.3 mL/min and below due to sample diffusion. Also, each sample showed extremely long retention times at 0.5mL/min and below. Therefore a flow rate of 0.5 - 1.0 mL/min is recommended for general analysis using ODP2 HP-4D. Flow rate of 0.1 - 0.2 mL/min are recommended for ODP2 HP-2D (2 mm I.D. x 150mm length).

Sample: 5 μL

  1. Phenol 300 ppm
  2. Methyl bezoate 350 ppm
  3. Toluene 1000 ppm

* Ratio of TPN [%] : TPN at a flow rate of 0.5 mL/min is set as 100%.

 

  1.  
Column
Shodex ODP2 HP-4D (4.6 mm I.D. x 150 mm)
Eluent
H2O/CH3CN=55/45
Detector
UV (254 nm)
Column temp.
40 ℃

Sample Name Index

Operation Manual / Certificate of Analysis

Operation Manuals and Certificate of Analysis / Inspection Certificate for the following products can be downloaded here.

Product Name Index

Product Information (Related Information)