Low MW polydimethylsiloxanes were separated using GPC K-801, an organic solvent SEC (GPC) column.
*Sales of the product used in this application is discontinued, however if you are still interested in this application, please contact us.
Sample : 0.1 % each, 100 μL
1. Polydimethylsiloxane (MW:770)
2. Polydimethylsiloxane (MW:237)
3. Hexamethyldisiloxane (MW:162)
Columns : Shodex GPC K-801 x 2 (8.0 mm I.D. x 300 mm) Eluent : CHCl3 Flow rate : 1.0 mL/min Detector : RI (Polarity: -) Column temp. : 40 °C
Sample Name Index
Applications
- Polystyrene Standards (8) (K-804L)
- Polystyrene Standards (17) (K-806M)
- Polystyrene Standards (21) (GF-HQ : THF, Chloroform and DMF)
- Epoxy Resin (2) (K-803L)
- Poly(o-Cresyl Glycidyl Ether)-co-Formaldehyde (GF-310 HQ)
- Poly(Ether Ether Ketone) (K-806M)
- Poly(Butylene Terephthalate) (2) (Eluent: Chloroform) (K-806M)
- Liquid Paraffin (KF-401HQ)
- Biodegradable Polymer (2) (Polylactic Acid) (LF-604)
- Biodegradable Polymer (3) (Polylactic Acid) (K-805L)
- Biodegradable Polymer (6) (Polylactic Acid) (KF-806M)
- Recycle Analysis of Lauryl Stearyl Thiodipropionate (K-2001)
- Comparison of Recycling Separation (FP-2002)
- Effects of Flow Rate (1) (FP-2002)
- Effects of Flow Rate (2) (FP-2002)
- Separation Performance Comparison between FP-2002 and Other Manufacturer's Column
- Polystyrene Oligomers' Separation Performance Comparison between FP-2002 and Other Manufacturer's Column
- Analysis of Polyhydroxybutyric Acid (LF-804)