For the calibration curve for GPC KD-802.5, PEG and PEO should be used as the standards. The calibration curve with PS is far different from that with PEG and PEO. For the calibration curve for OHpak SB-802.5 HQ, both PEG, PEO and PS can be used as the standards. The calibataion curve with PS is almost as same as that with PEG and PEO.
Please refer to Polystyrene Standards (9) (KD-802).
Sample :
PEG, Poly(ethylene glycol)
PEO, Poly(ethylene oxide)
PS, Polystyrene
Columns : Shodex GPC KD-802.5, OHpak SB-802.5 HQ (8.0 mm I.D. x 300mm each) Eluent : DMF Column temp. : 40 °C
Sample Name Index
Operation Manual / Certificate of Analysis
Operation Manuals and Certificate of Analysis / Inspection Certificate for the following products can be downloaded here.
Product Name Index
Applications
- Polystyrene Standards (9) (KD-802)
- Polystyrene Standards (21) (GF-HQ : THF, Chloroform and DMF)
- Poly(Ethylene Oxide) Standards (KD-806M + KD-802)
- Poly(Ethylene Glycol) Standards (2) (DMF Eluent) (KD-802 + KD-801)
- Phenol Resin (2) (KD-803 + KD-802)
- Phenoxy Resin (2) (KD-806M)
- Phenoxy Resin (3) (LF-604)
- Melamine Resin (KD-802)
- Melamine-Formaldehyde Resin (DMF Eluent) (KD-802)
- Polyvinylpyrrolidone (1) (DMF Eluent: KD-806M)
- Polyvinylpyrrolidone (4) (DMF Eluent: Effects of LiBr Concentration) (KD-806M)
- Poly(vinylidene Fluoride) (KD-806M)
- Cellulose Acetate (1) (KD-806M)
- Cellulose Acetate (4) (DMF Eluent: Effects of LiBr Concentration) (KD-806M)
- Cellulose Acetate (5) (SB-806M HQ)
- Chlorinated Rubber (KD-806M)
- Styrene Allylalcohol Copolymer (1) (KD-803 + KD-802)
- Styrene Maleic Anhydride Copolymer (KD-806M)
- Styrene Acrylonitrile Copolymer (1) (KD-806M)
- N-Vinylpyrrolidone Vinyl Acetate Copolymer (KD-806M)
- Vinyl Chloride Vinyl Acetate Copolymer (1) (KD-806M)
- Vinylidene Chloride Acrylonitrile Copolymer (1) (KD-806M)
- Vinylidene Chloride Acrylonitrile Copolymer (2) (Comparison of KD-800 and SB-800 HQ)
- Poly(-N,N-Dimethylaminomethyl Styrene) (1) (DMF Eluent) (Comparison KD-800 with SB-800 HQ)
- Phenol Formaldehyde Resin (Comparison of KD-800 and SB-800 HQ)
- Ethylene Maleic Anhydride Copolymer (Comparison of KD-800 and SB-800 HQ)
- Polycarbonate Resin (2) (Comparison of SB-800 HQ and KD-800)
- Poly(4-Vinylpyridine) (LF-804)
- Poly(4-vinylpyridine) (HK-404L)
- Poly(2-Vinylpyridine-co-styrene) (LF-804)
- Poly(Vinyl Butyral) (3) (LF-604)
- Copovidone (SB-806M HQ)
Applications (Related Information)
- Calibration Curves for KD-800 Series (DMF Eluent: PEG, PEO)
- Calibration Curves for KD-800 Series (DMF Eluent: PMMA)
- Calibration Curves for HK-400 Series (DMF Eluent: PEG, PEO)
- Calibration Curve for LF-804 (DMF Eluent: PEG, PEO)
- Calibration Curves for KF-806L (Various Eluents: PS)
- Comparison of Calibration Curves for KD-800 Series and SB-800 HQ Series (DMF Eluent)
- Calibration Curves for SB-800 HQ Series (DMF Eluent: PEG, PEO)
- Calibration Curves for SB-800 HQ Series (DMF Eluent: PMMA)
- Calibration Curves for SB-800 HQ Series (DMF Eluent: PS)
- Calibration Curves for SB-806M HQ (DMF Eluent: PEG, PEO and PS)
- Calibration Curves for LB-800 Series (DMF Eluent: PEG, PEO)
- Calibration Curves for GF-HQ Series (DMF Eluent: PS)
- Calibration Curve for GF-510 HQ + GF-310 HQ (DMF Eluent: PS)
- Calibration Curves for GF-HQ Series (DMF Eluent: PEG, PEO)
- Calibration Curves for GF-HQ Series (DMF Eluent: PMMA)