Calibration curves for OHpak SB-806M HQ are shown. For samples, which cannot be analyzed using the GPC KD-800 columns because of the adsorption by the packing material, the OHpak SB-800 HQ columns can be employed.
However, frequent replacement of in-column eluent is not recommended as it may shorten column life.
Sample :
PEO, Poly(ethylene oxide)
PEG, Poly(ethylene glycol)
PS, Polystyrene
Column : Shodex OHpak SB-806M HQ (8.0 mm I.D. x 300 mm) Eluent : DMF Column temp. : 40 °C
Sample Name Index
Operation Manual / Certificate of Analysis
Operation Manuals and Certificate of Analysis / Inspection Certificate for the following products can be downloaded here.
Product Name Index
Applications
- Polystyrene Standards (9) (KD-802)
- Polystyrene Standards (21) (GF-HQ : THF, Chloroform and DMF)
- Poly(Ethylene Oxide) Standards (KD-806M + KD-802)
- Poly(Ethylene Glycol) Standards (2) (DMF Eluent) (KD-802 + KD-801)
- Phenol Resin (2) (KD-803 + KD-802)
- Phenoxy Resin (2) (KD-806M)
- Phenoxy Resin (3) (LF-604)
- Melamine Resin (KD-802)
- Melamine-Formaldehyde Resin (DMF Eluent) (KD-802)
- Polyvinylpyrrolidone (1) (DMF Eluent: KD-806M)
- Polyvinylpyrrolidone (4) (DMF Eluent: Effects of LiBr Concentration) (KD-806M)
- Poly(vinylidene Fluoride) (KD-806M)
- Cellulose Acetate (1) (KD-806M)
- Cellulose Acetate (4) (DMF Eluent: Effects of LiBr Concentration) (KD-806M)
- Cellulose Acetate (5) (SB-806M HQ)
- Chlorinated Rubber (KD-806M)
- Styrene Allylalcohol Copolymer (1) (KD-803 + KD-802)
- Styrene Maleic Anhydride Copolymer (KD-806M)
- Styrene Acrylonitrile Copolymer (1) (KD-806M)
- N-Vinylpyrrolidone Vinyl Acetate Copolymer (KD-806M)
- Vinyl Chloride Vinyl Acetate Copolymer (1) (KD-806M)
- Vinylidene Chloride Acrylonitrile Copolymer (1) (KD-806M)
- Vinylidene Chloride Acrylonitrile Copolymer (2) (Comparison of KD-800 and SB-800 HQ)
- Poly(-N,N-Dimethylaminomethyl Styrene) (1) (DMF Eluent) (Comparison KD-800 with SB-800 HQ)
- Phenol Formaldehyde Resin (Comparison of KD-800 and SB-800 HQ)
- Ethylene Maleic Anhydride Copolymer (Comparison of KD-800 and SB-800 HQ)
- Polycarbonate Resin (2) (Comparison of SB-800 HQ and KD-800)
- Poly(4-Vinylpyridine) (LF-804)
- Poly(4-vinylpyridine) (HK-404L)
- Poly(2-Vinylpyridine-co-styrene) (LF-804)
- Poly(Vinyl Butyral) (3) (LF-604)
- Copovidone (SB-806M HQ)
Applications (Related Information)
- Calibration Curves for KD-800 Series (DMF Eluent: PEG, PEO)
- Calibration Curves for KD-800 Series (DMF Eluent: PMMA)
- Calibration Curves for HK-400 Series (DMF Eluent: PEG, PEO)
- Calibration Curve for LF-804 (DMF Eluent: PEG, PEO)
- Calibration Curves for KF-806L (Various Eluents: PS)
- Comparison of Calibration Curves for KD-800 Series and SB-800 HQ Series (DMF Eluent)
- Comparison of Calibration Curves for KD-802.5 and SB-802.5 HQ (DMF Eluent: PEG, PEO and PS)
- Calibration Curves for SB-800 HQ Series (DMF Eluent: PEG, PEO)
- Calibration Curves for SB-800 HQ Series (DMF Eluent: PMMA)
- Calibration Curves for SB-800 HQ Series (DMF Eluent: PS)
- Calibration Curves for LB-800 Series (DMF Eluent: PEG, PEO)
- Calibration Curves for GF-HQ Series (DMF Eluent: PS)
- Calibration Curve for GF-510 HQ + GF-310 HQ (DMF Eluent: PS)
- Calibration Curves for GF-HQ Series (DMF Eluent: PEG, PEO)
- Calibration Curves for GF-HQ Series (DMF Eluent: PMMA)